Merit Abrasives 08834123038 Flap Wheel 180 Grit 6x2 in

Product Description

The MERIT ABRASIVES 08834123038 is an unmounted aluminum oxide flap wheel designed for surface finishing, blending, and deburring on metal and other hard materials. The wheel measures 6 inches in outside diameter by 2 inches in width, with a 1-inch center hole for mounting on compatible spindles or arbors. Running at up to 6,000 RPM, it carries a 180-grit, very fine grade rating suited for final-pass finishing and light stock removal. The cloth backing provides flexibility across irregular contours. At 1.5 pounds, the wheel offers solid construction without excessive mass during extended use.

This flap wheel is used in metal fabrication, welding cleanup, and general surface prep applications where a very fine finish is required. It is well suited for use on angle grinders, bench-mounted spindles, or drill press setups fitted with the correct arbor. Typical applications include weld seam blending, edge finishing on structural steel, pipe and tube polishing, and light deburring of machined parts. It is installed and operated by machinists, fabricators, pipefitters, and maintenance technicians working in industrial or shop environments.

Key Features

• 180-grit aluminum oxide abrasive for very fine surface finishing
• Coated cloth backing allows flexibility on contoured workpieces
• 6-inch outside diameter by 2-inch width with 1-inch center hole
• Rated to 6,000 RPM maximum for use on standard rotary equipment
• No interleaf construction for direct abrasive contact with workpiece

Compatibility

Designed as an unmounted flap wheel for use with spindles, arbors, or rotary tools accepting a 1-inch bore. Verify that the drive equipment RPM rating meets or exceeds the 6,000 RPM maximum rating of this wheel before installation.

Installation Notes

Installation should be performed by qualified personnel familiar with rotary abrasive equipment. Always power down and lock out the drive unit before mounting or removing the wheel. Confirm the spindle or arbor RPM does not exceed the 6,000 RPM maximum rating marked on the wheel. Wear appropriate PPE including eye protection and gloves during installation and operation, in compliance with ANSI B11 and applicable shop safety standards.