Megapress 26630 Tee 3x3x3/4 in Press Fnpt Carbon Steel

Product Description

The MEGAPRESS 26630 is a carbon steel press tee fitting designed for cold press piping systems used in chilled water, hydronic heating, compressed air, and fire sprinkler applications. This tee features a 3 x 3 x 3/4 inch configuration with Press x Press x FNPT end connections, rated to 200 psi and suitable for operating temperatures from 14 to 284 degrees F. The fitting measures 3.74 inches in length and is installed using a standard jaw-and-tool press method, eliminating the need for open flame or threading on the primary connections. Licensed plumbing and mechanical contractors are the typical installers on commercial and industrial projects.

This fitting is built for piping systems constructed with ASTM A53, A106, A135, and A795 Schedule 10 and Schedule 40 standard-weight black steel pipe. The reduced 3/4 inch FNPT branch outlet allows direct connection to threaded instrumentation, sensors, valves, or branch takeoffs without additional adapters. It is well suited for mechanical rooms, rooftop equipment, commercial HVAC hydronic loops, and wet-pipe fire suppression headers where a reliable press joint is preferred over welded or grooved connections.

Key Features

• 3 x 3 x 3/4 inch nominal size with Press x Press x FNPT end connections
• 200 psi pressure rating for demanding commercial system applications
• Operating temperature range: 14 to 284 degrees F
• Carbon steel construction compatible with black steel pipe systems
• Compatible with ASTM A53, A106, A135, and A795 SCH 10 and SCH 40 pipe
• No flame, threading, or welding required on press-end connections

Compatibility

Designed for use in piping systems utilizing ASTM A53, A106, A135, and A795 Schedule 10 and Schedule 40 standard-weight black steel pipe in chilled water, hydronic heating, compressed air, and fire sprinkler applications.

Installation Notes

Installation must be performed by a qualified plumbing or mechanical contractor following applicable local codes and IFGC or IPC requirements where relevant. Depressurize and drain the piping system fully before making or modifying any connections. Use the manufacturer-specified press tool and jaw size for the 3-inch press connection to ensure a proper seal. Verify pipe end preparation — pipe must be clean, round, and free of burrs before inserting into the press fitting.

Technical Specifications

• Nominal Size: 3 x 3 x 3/4 inches
• End Style: Press x Press x FNPT
• Fitting Type: Tee
• Pressure Rating: 200 psi
• Temperature Range: 14 to 284 degrees F
• Overall Length: 3.74 inches
• Material: Carbon Steel
• Origin: Import

Standard Information

• Brand: MEGAPRESS
• Manufacturer Part Number: 26630