Megapress 25306 Carbon Steel Press Tee 3/4 Inch

Product Description

The MEGAPRESS 25306 is a 3/4-inch carbon steel press tee from the Viega MegaPressG Model 6618 series, designed for use in gas piping systems where no-flame, no-threading connections are required. The fitting uses a press end style with an HNBR sealing element, identifiable by a yellow dot, and is rated for temperatures from -40 to 180 degrees F. It is compatible with Schedule 5 through Schedule 40 black iron pipe. The MegaPressG system eliminates cutting oils and open-flame work, making it well suited for service in occupied buildings and retrofit applications. Licensed gas fitters and mechanical contractors are the primary installers.

This tee fitting is engineered for systems carrying natural gas, LP gas, diesel fuel, compressed air, and vacuum. The press connection method reduces installation time compared to traditional threaded or welded carbon steel fittings. It is appropriate for both new construction and retrofit piping in commercial and light industrial settings where a clean, efficient connection to a tee configuration is needed on 3/4-inch black iron pipe runs.

Key Features

• Press end style — no threading, no welding, no cutting oil required
• Carbon steel construction rated for gas service on Schedule 5 to Schedule 40 black iron pipe
• HNBR sealing element with yellow dot for easy identification during inspection
• Temperature rated from -40 to 180 degrees F
• Suitable for natural gas, LP gas, diesel fuel, compressed air, and vacuum applications
• Manufactured in Germany (Country of Origin: DE)

Compatibility

Designed for use with Schedule 5 through Schedule 40 black iron pipe in 3/4-inch nominal size as part of the Viega MegaPressG Model 6618 press system for gas and fluid service applications.

Installation Notes

Installation must be performed by a licensed gas fitter or mechanical contractor in accordance with applicable local codes and the International Fuel Gas Code (IFGC). Shut off and verify zero pressure in the gas or fluid line before pressing the fitting. A compatible Viega press tool with the correct jaw set for the MegaPressG system is required to achieve a proper press connection — do not substitute with non-approved tooling. After pressing, the connection must be leak-tested per code requirements before returning the system to service.