Mcgill 2200112000 Sealed Stud Cam Follower 2in Needle Roller

Product Description

The MCGILL 2200112000 is a sealed stud-type cam follower with a cylindrical steel roller and needle roller bearing internals. It features a 2-inch roller diameter, 1.25-inch roller width, and a 7/8-inch stud diameter with a 2-inch stud length and 7/8-14 thread size. The sealed design retains lubrication and blocks contamination, making it well suited for industrial motion-control and conveyor applications. The hex head stud allows positive wrench engagement during installation. Rated at 8,090 pounds dynamic load capacity and 10,570 pounds static load capacity, this cam follower is built for demanding linear and radial loading scenarios encountered in production and material-handling equipment.

This cam follower is used in machinery where a rolling element must track a cam surface, guide rail, or track under load. Typical installations include conveyor systems, indexing mechanisms, automation equipment, and general industrial machinery requiring a compact stud-mounted rolling contact element. It is installed and serviced by millwrights, industrial maintenance technicians, and mechanical engineers. The sealed construction reduces maintenance intervals in environments with moderate contamination or limited relubrication access.

Key Features

• 2-inch cylindrical steel roller for broad contact surface and high load distribution
• Needle roller bearing internals support a dynamic load rating of 8,090 pounds and static load rating of 10,570 pounds
• Sealed closure type retains lubrication and resists contamination ingress
• 7/8-14 threaded stud with hex head allows secure, torque-wrench installation
• Maximum operating speed of 1,400 RPM
• 1-inch thread length provides adequate thread engagement across standard mounting plate thicknesses

Compatibility

This part is listed under McGill part number CF 2 SB. Designed as an OEM-style replacement or direct-fit stud cam follower for industrial machinery specifying a 2-inch roller diameter sealed needle roller cam follower with 7/8-14 stud thread.

Installation Notes

Installation should be performed by a qualified millwright or mechanical maintenance technician. Power down and lock out all energy sources to the machine before removing or installing cam followers. The hex head stud is designed for wrench engagement — do not install by striking. Verify thread engagement depth and ensure the mounting surface is clean and free of burrs before threading in the stud.