Mcgill 2144700000 Plain Cam Follower 1.5in Ball Bearing

Product Description

The MCGILL 2144700000 is a plain cam follower, also cataloged under McGill part number PCF 1-1/2, designed to track cam surfaces and guide motion in linear and rotary mechanical systems. The roller measures 1.5 inches in diameter and 1.19 inches wide, supported by a 0.625-inch stud with a 5/8-18 threaded end. Internal construction uses a ball bearing for smooth, low-friction rolling under load. The unit carries a dynamic load capacity of 2,520 pounds and a static load capacity of 1,370 pounds. Mechanical assemblers, millwrights, and industrial maintenance technicians install this type of follower in conveyor drives, indexing mechanisms, and cam-actuated equipment.

This cam follower suits light-to-medium industrial machinery where a stud-mount, threaded installation is required. The 1.5-inch steel roller and ball bearing internals make it appropriate for applications that demand consistent radial load capacity and precise cam tracking. The 3/4-inch thread length provides adequate engagement on standard mounting plates and brackets. It is sold as a single unit and is a direct fit in applications specifying a PCF 1-1/2 style follower.

Key Features

• 1.5-inch diameter steel roller with 1.19-inch roller width for stable cam surface contact
• Ball bearing internal construction for reduced friction and consistent rolling performance
• 2,520-pound dynamic load capacity and 1,370-pound static load capacity
• 5/8-18 threaded stud with 3/4-inch thread length for secure stud-mount installation
• 1/4-inch hex socket for precise installation torque application
• All-steel roller material for durability in industrial environments

Compatibility

Designed as an OEM-style replacement or direct substitute for applications specifying the McGill PCF 1-1/2 plain cam follower. Suitable for stud-mount cam follower positions in mechanical assemblies requiring a 1.5-inch roller diameter and 5/8-18 thread specification.

Installation Notes

Installation is typically performed by millwrights or mechanical maintenance technicians familiar with bearing and cam follower systems. Power down and de-energize all associated machinery before removing or installing the follower. Use a 1/4-inch hex key to seat the stud to the appropriate engagement depth without over-torquing the threaded shank. Verify roller-to-cam surface alignment after installation to prevent uneven wear and premature bearing failure.