Matco-norca mn-ft3ca03 Forged Steel Pipe Cap 1/2 in 3000 Lb

Product Description

The MATCO-NORCA mn-ft3ca03 is a forged steel threaded pipe cap rated for Class 3000 lb service. It is designed to terminate the end of a threaded pipe run, sealing the line against pressure and flow. Manufactured from ASTM A105N forged steel, this cap delivers the wall integrity and pressure tolerance required in demanding piping systems. The fitting measures approximately 1.1 inches in diameter by 1.26 inches in length with a wall thickness of 0.25 inches. It is installed by licensed plumbers and pipefitters working on high-pressure industrial, commercial, or mechanical piping systems.

This cap is suited for use in high-pressure piping assemblies where a threaded closure is required. The 1/2 inch threaded connection makes it compatible with standard half-inch pipe runs in steam, hydraulic, gas, and process piping applications. Its forged construction and Class 3000 lb pressure rating make it appropriate for industrial mechanical rooms, commercial HVAC piping, and process plant installations where standard weld fittings are not practical or where threaded connections are code-permitted.

Key Features

• Forged steel construction per ASTM A105N for consistent grain structure and pressure integrity
• Class 3000 lb pressure rating suitable for high-pressure threaded piping systems
• 1/2 inch threaded connection for standard pipe termination
• 0.25 inch wall thickness for added durability under sustained pressure
• Compact profile at approximately 1.1 inches diameter by 1.26 inches length
• Forged manufacturing method reduces porosity compared to cast alternatives

Compatibility

Designed as an OEM-style replacement or new-installation threaded pipe cap for 1/2 inch Class 3000 lb forged steel piping systems.

Installation Notes

Installation should be performed by a licensed plumber or pipefitter in accordance with applicable mechanical and plumbing codes, including ASME B31.1 or B31.3 where applicable. Depressurize and isolate the pipe section completely before threading on the cap. Apply an appropriate thread sealant or PTFE tape rated for the service medium before installation. Do not over-tighten, as this can damage the fitting threads or the mating pipe threads.