Matco-norca 773s07 Pvc Single Union Ball Valve 1-1/2 in

Product Description

The MATCO-NORCA 773s07 is a 1-1/2 inch PVC single union ball valve rated for 150 psi service pressure, designed for pool and spa plumbing systems. The socket-by-socket (SxS) end connections allow direct solvent-weld installation into standard Schedule 40 PVC piping. The single union design lets technicians remove the valve body from the line without cutting pipe, speeding up service and winterization work. This valve is a standard component in recirculation loops, equipment pads, and filter bypass lines where reliable shutoff and easy serviceability are required. Pool and spa service professionals and plumbers are the primary installers.

This valve is suited for residential and light commercial pool and spa installations where PVC piping is used throughout the circulation system. Typical applications include pump isolation, filter isolation, and heater bypass configurations on equipment pads. The 150 psi pressure rating provides sufficient margin for standard residential pool pump discharge pressures. Its chemical-resistant PVC construction handles chlorinated and treated water encountered in pool and spa environments without corrosion or degradation.

Key Features

• 1-1/2 inch socket-by-socket (SxS) end connections for solvent-weld installation into standard PVC pipe
• 150 psi maximum working pressure rating suitable for pool and spa circulation systems
• Single union construction allows valve removal without cutting the pipe for fast servicing
• PVC body provides corrosion resistance in chlorinated and chemically treated water
• Full-port ball valve design delivers minimal flow restriction when fully open

Compatibility

Designed as an OEM-style replacement or new-installation ball valve for residential and light commercial pool and spa plumbing systems using 1-1/2 inch Schedule 40 PVC piping.

Installation Notes

Installation should be performed by a licensed plumber or qualified pool and spa technician in accordance with local plumbing codes and applicable IPC requirements. Shut down the circulation pump and relieve system pressure before removing or installing any valve. Use approved PVC solvent cement on socket connections and allow full cure time before returning the system to service. Do not exceed the 150 psi rated working pressure and verify compatibility with the chemicals used in the system before installation.

Technical Specifications

• Connection Type: Socket x Socket (SxS) solvent weld
• Pipe Size: 1-1/2 inches
• Maximum Working Pressure: 150 psi
• Body Material: PVC
• Valve Type: Single Union Ball Valve
• Application: Pool and Spa
• UPC: 082647012912

Standard Information

• Brand: MATCO-NORCA
• Manufacturer Part Number: 773s07