M.k. Morse 163310100C-MSC Band Saw Blade Coil 10 Tpi

Product Description

The M.K. MORSE 163310100C-MSC is a carbon steel band saw blade coil stock designed for continuous cutting applications in metal fabrication, woodworking, and general trade shop environments. Supplied as a 100-foot coil, this blade measures 3/8 inch wide and 0.025 inches thick, with a constant 10 teeth per inch (TPI) pitch. The raker tooth set and flexible back construction allow the blade to track smoothly on standard band saw wheels and handle curved as well as straight cuts without premature fatigue or blade breakage. Licensed tradespeople and experienced shop technicians are the primary installers and users of this product.

This coil stock is suited for shops and service operations that cut blades to custom lengths for specific band saw models or that require a ready supply of replacement blade material on hand. The 100-foot length yields multiple finished blades per coil, making it practical for operations with high blade turnover. The constant 10 TPI pitch is effective for general-purpose cutting in both ferrous and non-ferrous materials at moderate stock thicknesses. Contour cutting is not a rated application for this blade configuration.

Key Features

• Carbon steel construction provides a balance of toughness and flexibility suitable for high-cycle band saw use
• 10 TPI constant pitch delivers consistent chip load and smooth finish on moderate-thickness workpieces
• Raker tooth set clears chips efficiently during straight and mildly curved cuts
• Flexible back design reduces stress cracking and extends blade service life on standard band saw wheels
• 3/8 inch blade width is compatible with a wide range of light-duty and mid-range band saw machines
• 100-foot coil format allows field cutting to exact lengths, minimizing waste

Compatibility

Designed as a coil-stock replacement blade for standard band saw machines that accept 3/8 inch wide blades. Cut to length and joined using a blade welder or mechanical connector appropriate for 0.025 inch blade thickness stock.

Installation Notes

Blade cutting and joining should be performed by a qualified technician using a band saw blade welder or appropriate mechanical fastener rated for the blade thickness. Disconnect and lock out power to the band saw before installing any blade. Verify blade tension and tracking per the band saw manufacturer guidelines before resuming operation. Wear cut-resistant gloves when handling coil stock, as uncoiled blade material can spring and cause laceration injuries.