M.a. Ford. 30010430 Circuit Board Drill Bit 2.65mm

Product Description

The M.A. FORD. 30010430 is a solid carbide circuit board drill bit designed for precision drilling in PCB and electronic assembly applications. It features a 2.65 mm diameter, a 118-degree point angle, and a fast spiral flute geometry that promotes efficient chip evacuation during high-speed drilling. The bright, uncoated finish is suited for applications where coating buildup or heat transfer could affect hole quality. With an overall length of 38 mm and a flute length of 16 mm, this bit is sized for controlled, repeatable drilling in thin-material work. It is typically installed and used by CNC machine operators, electronics manufacturers, and precision fabrication technicians.

This drill bit is intended for use in circuit board drilling operations where tight hole tolerances are required. It is rated for primary workpiece materials including cast iron, non-ferrous metals, and steel. The right-hand cutting direction and 35-degree helix angle make it compatible with standard CNC drilling spindles and benchtop PCB drill presses. The Series 300 designation places it within M.A. FORD.'s line of small-diameter carbide drill bits. Single-piece packaging makes it straightforward to source as a direct replacement or supplemental tooling in a precision drilling setup.

Key Features

• 2.65 mm diameter with matching 2.65 mm shank for concentric, chatter-free seating
• 118-degree point angle for accurate entry on flat and slightly curved board surfaces
• Fast spiral flute with 35-degree helix angle for effective chip clearance
• Solid carbide construction delivers rigidity and wear resistance in high-cycle drilling
• Bright uncoated finish maintains dimensional accuracy where coating thickness is a concern
• Right-hand cut compatible with standard CNC and drill press spindle rotation

Compatibility

Designed as an OEM-style tooling replacement for circuit board and precision small-diameter drilling applications in CNC drilling machines and drill presses accepting a 2.65 mm shank. Rated for cast iron, non-ferrous metal, and steel workpiece materials.

Installation Notes

Installation and use of this bit is typically performed by CNC machine operators or precision fabrication technicians. Ensure the machine spindle is fully stopped and powered down before changing tooling. Confirm the collet or chuck is clean and properly sized for the 2.65 mm shank to prevent runout. Avoid applying excessive axial force during drilling, as small-diameter carbide bits are brittle and susceptible to breakage under side loads or feed rate spikes.