M.a. Ford. 27206200 Chucking Reamer 0.0620 in Carbide

Product Description

The M.A. FORD. 27206200 is a solid carbide chucking reamer designed for precision hole finishing in tight-tolerance applications. With a reamer diameter of 0.0620 inches and a diameter tolerance of +0.0001 to +0.0003 inches, this tool delivers consistent, accurate bore sizing in production and maintenance machining environments. The 4-flute, straight-flute geometry with right-hand cutting direction provides clean, controlled material removal. The bright, uncoated finish makes it well-suited for use with a range of workpiece materials. Machinists, toolmakers, and maintenance technicians install this reamer in CNC machining centers, drill presses, and manual lathes where repeatable hole quality is required.

This reamer is part of the M.A. FORD. Series 272 line and fits applications requiring small-diameter precision reaming. Its straight-cylindrical shank interfaces directly with standard chucks and collets, making it a straightforward drop-in for most spindle setups. The compact overall length of 1.5 inches and 0.375-inch flute length make it appropriate for shallow-bore finishing operations in close-clearance fixtures or multi-step part programs where reach is limited.

Key Features

• Solid carbide construction for rigidity and wear resistance in precision boring operations
• 0.0620-inch reamer diameter with a tight tolerance of +0.0001 to +0.0003 inches for accurate hole sizing
• 4-flute straight-flute design with right-hand cutting direction for consistent chip evacuation
• Bright, uncoated finish suitable for a variety of workpiece materials
• Straight-cylindrical shank for direct compatibility with standard chucks and collets
• Series 272 designation for easy cross-referencing within the M.A. FORD. product line

Compatibility

Designed as an OEM-style solid carbide chucking reamer for use in standard chuck and collet spindle setups requiring 0.0620-inch diameter precision hole finishing.

Installation Notes

Installation and use of this reamer should be performed by a qualified machinist or toolroom technician. Ensure the machine spindle is fully powered down and locked out before mounting or removing the reamer from the chuck or collet. Verify chuck or collet runout is within acceptable limits before use, as excessive runout will compromise hole tolerance and tool life. Do not exceed the recommended feed and speed parameters for small-diameter solid carbide tooling.