M.a. Ford 22941340 Carbide Drill Bit 10.5 Mm 150 Deg

Product Description

The M.A. FORD 22941340 is a solid carbide jobber length drill bit engineered for high-performance drilling in non-ferrous metals and similar materials. It features a 150-degree point angle with web thinning for reduced thrust and cleaner entry, paired with a three-flute parabolic flute design that promotes efficient chip evacuation at elevated feed rates. The 10.5 mm diameter bit carries a bright uncoated finish, a straight-cylindrical shank measuring 12 mm in diameter, and an overall length of 118 mm with a flute length of 71 mm. Manufactured to DIN 6537 L specification under ISO 9001:2015 certification, this tool suits professional machinists, toolroom technicians, and CNC operators working in production environments.

The 22941340 is designed for drilling non-ferrous metals, including aluminum alloys, copper, brass, and similar workpiece materials coded N and O under common tooling classification systems. Its 5xD flute-to-diameter ratio and parabolic flute geometry make it a practical choice for deeper hole applications where chip packing is a concern. The straight-cylindrical shank provides direct compatibility with standard drill chucks and collet holders across manual drill presses and CNC machining centers. Maximum drilling depth is 56 mm per the Series 229 design parameters.

Key Features

• Solid carbide construction for rigidity and wear resistance in non-ferrous machining
• 150-degree point angle with web-thinned, tapered web configuration reduces entry thrust
• Three-flute parabolic design accelerates chip evacuation in deeper cuts
• 5xD flute-by-diameter ratio supports drilling to 56 mm maximum depth
• Bright uncoated finish suited to non-ferrous workpiece materials
• Conforms to DIN 6537 L specification; produced under ISO 9001:2015 certified quality system

Compatibility

Designed as a Series 229 DIN 6537 L jobber length drill bit compatible with standard straight-cylindrical shank chucks and collet systems. Suitable for primary workpiece materials classified as non-ferrous metals under tooling material codes N and O.

Installation Notes

This bit is installed by machinists and CNC operators using standard drill chuck or collet toolholding systems; verify that the holder bore is sized for a 12 mm straight shank before mounting. Secure the shank to the full recommended engagement depth of the holder and confirm runout is within acceptable tolerance before initiating a cut. Always power down and lock out the spindle before changing tooling. Follow the machine manufacturer and shop safety guidelines for speeds, feeds, and coolant strategy when drilling non-ferrous materials with solid carbide tooling.