M.a. Ford. 20709800 Carbide Brad Point Drill Bit

Product Description

The M.A. FORD. 20709800 is a solid carbide brad point drill bit designed for precise, clean-entry drilling in hard materials where accurate hole location is critical. Built from solid carbide, this bit delivers rigidity and wear resistance beyond what high-speed steel can offer. It carries a 0.098-inch drill diameter with a matching 0.098-inch shank, a flute length of 0.5 inches, and an overall length of 0.8125 inches. The brad point tip centers on the workpiece without walking, making it a reliable choice for machinists and tool-room technicians working with tight tolerances on small-diameter holes.

This bit is suited for production and precision drilling applications in machine shop environments, tool and die work, and controlled-feed operations. Its compact overall length and small diameter make it appropriate for use in CNC machining centers, drill presses, and benchtop drilling fixtures where rigidity and runout control are maintained by the machine setup. The uncoated finish is typical for general carbide tooling where re-sharpening or specific substrate compatibility is a consideration.

Key Features

• Solid carbide construction for superior hardness and wear resistance compared to HSS tooling
• Brad point geometry centers the drill on entry and reduces hole wander
• 0.098-inch drill diameter and matching shank diameter for direct chuck mounting
• 2-flute design promotes chip evacuation in short, controlled cuts
• Uncoated finish compatible with a wide range of cutting fluids and regrind protocols
• Compact 0.8125-inch overall length suits close-clearance setups

Compatibility

Designed as an OEM-style replacement or production tooling option for CNC machining centers, drill presses, and precision drilling fixtures accepting a 0.098-inch round shank drill bit.

Installation Notes

Installation and use should be performed by qualified machinists or tool-room technicians familiar with small-diameter carbide tooling. Ensure the machine spindle and chuck or collet are clean and true before seating the bit, as runout will significantly reduce tool life at this diameter. Use appropriate cutting fluid for the workpiece material and set feed rates conservatively, as solid carbide bits at small diameters are brittle and susceptible to breakage under side loading or excessive feed pressure. Never use this bit in a hand-held drill.