M.a. Ford 16400600 Square End Mill 0.006 in 2 Flute Carbide

Product Description

The M.A. FORD 16400600 is a solid carbide square end mill engineered for high-precision micro-milling applications. With a cutting diameter of 0.006 inches and a length of cut of 0.012 inches, this tool is built for fine detail work in tight geometries. The stub-length design provides rigidity to minimize deflection, and the 2-flute spiral configuration with a 30-degree helix angle promotes efficient chip evacuation. Center-cutting capability allows direct plunge entry into the workpiece. The uncoated carbide construction suits a broad range of workpiece materials. Machinists and tool-and-die professionals working on molds, electronics components, and precision fixtures are the primary users of this end mill.

This end mill is suited for use in CNC machining centers handling ferrous alloys, cast iron, non-ferrous metals, non-metals, steel, and heat-resistant superalloys, corresponding to material codes H, K, M, N, P, and S. The straight-cylindrical shank at 0.125 inches diameter seats directly in standard collet and chuck systems. Its stub-length profile makes it especially practical for multi-axis setups with limited tool-path clearance, and for high-speed finishing passes where tool rigidity is critical.

Key Features

• 0.006 inch cutting diameter for micro-precision milling
• Solid carbide construction for hardness and wear resistance
• 2-flute spiral design with 30-degree helix angle for efficient chip removal
• Center-cutting geometry allows direct plunge cuts
• Right-hand cut and right-hand flute orientation
• Stub-length body maximizes rigidity and reduces deflection at small diameters

Compatibility

Designed as an OEM-style replacement and standard production end mill compatible with CNC machining centers and manual mills equipped with collet or drill chuck toolholding systems accepting a 0.125 inch straight-cylindrical shank. Suitable for workpiece material categories H, K, M, N, P, and S as designated by the manufacturer.

Installation Notes

Installation should be performed by a qualified machinist following machine tool safety procedures. Power down and lock out the spindle before seating or removing the tool from the collet or chuck. Verify runout with a dial indicator after seating, as tool deflection at this diameter is especially sensitive to collet condition and clamping torque. Always confirm spindle speed and feed rate parameters are appropriate for the material and diameter before initiating a cut.