M.a. Ford. 15737501A Corner Radius End Mill 3/8 in 6 Fl

Product Description

The M.A. FORD. 15737501A is a solid carbide corner radius end mill engineered for demanding material removal in hard materials. It features a 3/8 inch diameter with a 0.015 inch corner radius, 6 flutes in a right-hand spiral configuration, and a high-helix design at 45 degrees. The tool is finished with an ALtima 52 PVD coating, which improves wear resistance and extends tool life in difficult cutting conditions. With a 1 inch length of cut and 4 inch overall length, this single-end, centercutting mill suits both roughing and finishing operations. Machinists and CNC operators working in hard material applications will find this a reliable production tool.

This end mill is designed for use with standard straight-cylindrical toolholders. Its close pitch flute spacing and high helix angle make it effective for aggressive cuts in hard workpiece materials where surface finish and edge integrity are both priorities. The centercutting geometry allows plunge entry, adding versatility to its application range. The 3/8 inch shank diameter matches the 3/8 inch mill diameter for straightforward setup in compatible toolholders.

Key Features

• Solid carbide construction for rigidity and heat resistance in hard material cutting
• ALtima 52 PVD coating for extended tool life and reduced wear
• 6-flute, high-helix (45 degree) design supports both roughing and finishing passes
• Centercutting capability allows direct plunge entry
• 0.015 inch corner radius reduces stress concentration at cutting edges
• Right-hand cut and right-hand flute direction for standard CNC mill setups

Compatibility

Designed for use with straight-cylindrical toolholders. Suited for CNC machining centers and manual mills configured for 3/8 inch shank tooling. Primary workpiece material classification is hard material (code H).

Installation Notes

Installation should be performed by a qualified machinist or CNC operator. Ensure the machine spindle is fully stopped and the tool changer or spindle lock is engaged before inserting or removing the end mill. Secure the shank fully within the toolholder collet or chuck to the minimum engagement depth recommended by the toolholder manufacturer. Verify runout with a dial indicator before beginning cuts to protect both the tool and the workpiece.