M.a. Ford 13850005R.030F Corner Radius End Mill 1/2in

Product Description

The M.A. FORD 13850005R.030F is a solid carbide corner radius end mill designed for high-performance milling of non-ferrous metals. It features a 1/2 inch diameter, a 2 inch length of cut, and a 0.03 inch corner radius that reduces stress concentrations at the edge of a cut and extends tool life. The three-flute, right-hand spiral geometry supports both roughing and finishing operations in a single setup. A Fordlube PVD coating reduces friction and heat buildup during cutting. The centercutting design allows plunge entry, adding versatility to the tool's range of operations. Machinists and CNC operators in job shops, manufacturing facilities, and production environments use this tool with standard straight-cylindrical toolholders.

This end mill is built for non-ferrous metal applications including aluminum, brass, copper, and similar materials. The Series 138 long-length geometry with a 2 inch reach provides clearance in deeper pockets and slots where standard-length tools cannot reach. The normal pitch, medium helix, and single-end configuration make it suitable for general-purpose profiling, contouring, slotting, and side milling in both manual and CNC machining centers.

Key Features

• Solid carbide construction for rigidity and wear resistance in non-ferrous metal cutting
• 0.03 inch corner radius reduces edge chipping and improves surface finish at corners
• Fordlube PVD coating minimizes friction and extends cutting tool life
• Centercutting design allows direct plunge entry without a pre-drilled hole
• Right-hand cut, right-hand flute spiral with medium helix for efficient chip evacuation
• Long-length Series 138 geometry provides extended reach into deep features

Compatibility

Designed for use with standard straight-cylindrical toolholders. Primary workpiece material is non-ferrous metal. Compatible with CNC machining centers and manual mills accepting a 1/2 inch shank diameter.

Installation Notes

Installation should be performed by a qualified machinist or CNC operator. Ensure the toolholder is clean and free of debris before seating the shank to the full recommended engagement depth. Verify runout with a dial indicator before beginning a cut. Follow machine manufacturer guidelines and applicable shop safety procedures when setting speeds and feeds for the workpiece material.