M.a. Ford. 13837510 Square End Mill 3/8 in 3 Flute Carbide

Product Description

The M.A. FORD. 13837510 is a solid carbide square end mill designed for precision milling of non-ferrous metals and similar materials. It features a 3/8-inch mill diameter, a 9/16-inch length of cut (0.5625 inches), and a 3-inch overall length with a straight cylindrical 3/8-inch shank. The 36-degree helix angle and three right-hand helical flutes promote efficient chip evacuation and smooth cutting action. The bright/uncoated finish makes this end mill well suited for non-ferrous applications where coating buildup would be a concern. It is single-end, center-cutting, and manufactured from micrograin solid carbide for rigidity and edge retention.

This end mill is intended for use on non-ferrous metals, including aluminum, brass, copper, and similar materials. It fits standard CNC machining centers, manual knee mills, and other equipment accepting a 3/8-inch straight shank. The Series 138 designation places it within M.A. FORD.'s lineup of general-purpose solid carbide end mills. Typical applications include slotting, profiling, and peripheral milling where a short-to-medium length of cut is required and runout control is critical.

Key Features

• Solid micrograin carbide construction for high rigidity and long edge life
• 3/8-inch mill diameter with a tight tolerance of +0.000 to -0.0005 inches
• 9/16-inch (0.5625-inch) length of cut suitable for slotting and profiling
• 36-degree helix angle with three right-hand helical flutes for efficient chip evacuation
• Center-cutting design allows plunge entry into the workpiece
• Bright/uncoated finish optimized for non-ferrous metal cutting
• Straight cylindrical shank with h6 tolerance for precise tool holding

Compatibility

Designed for use in standard tool holders and collet chucks accepting a 3/8-inch straight cylindrical shank. Optimized for primary use in non-ferrous metal applications as indicated by workpiece material code N.

Installation Notes

Installation should be performed by a qualified machinist or tooling technician familiar with end mill setup procedures. Ensure the machine spindle is fully stopped and the tool holder is clean and free of debris before seating the shank. Use a properly sized collet or end mill holder to achieve full shank engagement and minimize runout. Verify spindle direction is set to right-hand rotation to match the cutting direction of this tool.