M.a. Ford 13837505R.060 Corner Radius End Mill 3/8 in

Product Description

The M.A. FORD 13837505R.060 is a solid carbide corner radius end mill designed for precision milling of non-ferrous metals. It carries a 3/8-inch cutting diameter, a 1-inch length of cut, and a 0.06-inch corner radius that reduces stress concentrations at part corners and extends tool life compared to sharp-edge end mills. With 3 right-hand spiral flutes and a bright/uncoated finish, this tool is suited for both roughing and finishing passes. A licensed machinist or toolroom technician installs it directly into a compatible toolholder for CNC or manual milling operations.

This end mill targets non-ferrous metal applications such as aluminum, brass, and copper alloys where clean surface finishes and dimensional accuracy are required. It is a single-end, centercutting design, meaning it can be plunged directly into the workpiece. The straight cylindrical shank measures 3/8 inch in diameter, matching common collet and end mill holder sizes used in vertical machining centers and manual knee mills. Series 138 classification places it within M.A. FORD's standard-length, normal-pitch product family.

Key Features

• 0.06-inch corner radius reduces corner chipping and stress risers on finished parts
• Solid carbide construction provides rigidity and heat resistance for higher surface speeds
• Centercutting geometry allows direct plunge entry without pre-drilling
• 3 right-hand spiral flutes support efficient chip evacuation in non-ferrous materials
• Bright/uncoated finish is suitable for use with aluminum and other materials sensitive to built-up edge on coated tools
• Normal pitch, medium helix - balanced between feed rate and finish quality

Compatibility

Designed for use with standard toolholders accepting a 3/8-inch straight cylindrical shank. Primary workpiece material is non-ferrous metal. Suitable for CNC machining centers and manual milling machines equipped with compatible collets or end mill holders.

Installation Notes

Installation is performed by a machinist or toolroom professional. Power down and lock out the machine spindle before seating or removing the tool. Insert the shank fully into the toolholder to the recommended gauge length and torque the retention screw or collet nut per the toolholder manufacturer's specifications. Inspect the cutting edges and corner radius for chips or wear before each use, and verify runout with a dial indicator after tool change when holding tight tolerances.