Lutron RR-T10RL-SW Ra2 10-button Keypad Switch

Product Description

The Lutron Electronics RR-T10RL-SW is a large-format 10-button keypad designed for use with the Lutron Ra2 Select lighting control system. It serves as a scene and zone control station, allowing installers to assign individual lighting scenes, dimming levels, or device groups to each button. Licensed electricians and low-voltage lighting control technicians typically specify and install this keypad as part of a whole-home or commercial lighting automation project. The RR-T10RL-SW mounts at a standard wall location and communicates with the Ra2 Select main repeater via the proprietary Clear Connect RF protocol, eliminating the need for dedicated control wiring runs to each station.

This keypad is suited for residential and light commercial applications where multiple lighting zones or scenes need to be accessible from a single wall station. Typical installations include main living areas, conference rooms, hospitality spaces, and other locations where occupants require intuitive, one-touch scene recall. It is configured through the Lutron Ra2 Select programming interface during commissioning and integrates with other Ra2 Select devices on the same system.

Key Features

• 10 programmable buttons provide flexible scene and zone assignment for complex lighting layouts
• Large keypad format for high-visibility placement in residential or commercial spaces
• Designed for the Ra2 Select wireless lighting control platform using Clear Connect RF communication
• No dedicated low-voltage control wiring required between keypad and repeater
• Sold as a single unit for straightforward quantity management on multi-room projects

Compatibility

Designed for use with the Lutron Ra2 Select lighting control system. Confirm repeater firmware version and system device limits during design to ensure compatibility with existing Ra2 Select installations.

Installation Notes

Installation should be performed by a licensed electrician or certified Lutron Ra2 Select installer in accordance with NEC requirements and local codes. Power down the circuit at the breaker before any wiring work at the wall box. The keypad must be commissioned through the Ra2 Select programming software to assign button functions and scenes. Do not attempt to use this device outside of the Ra2 Select system ecosystem, as it is not compatible with other Lutron system families or third-party controllers without verified integration.