Lutron Electronics RRD-PRO-BR Ra2 Pro Led+ Dimmer

Product Description

The LUTRON ELECTRONICS RRD-PRO-BR is a Ra2 Pro LED+ dimmer in a brown finish, designed for use within Lutron Ra2 Select and compatible radio frequency lighting control systems. This dimmer provides smooth, flicker-free dimming performance optimized for LED lamp loads, making it a preferred choice for residential and light commercial lighting installations. It installs at the wall station location and communicates wirelessly with the Ra2 system processor, eliminating the need for dedicated low-voltage control wiring at the switch leg. Licensed electricians perform the installation as part of a broader Ra2 system commissioning workflow.

The RRD-PRO-BR is suited for residential and light commercial environments where a Ra2 radio frequency lighting control system is already in place or being newly installed. It is used in single-gang wall locations and integrates into scenes, schedules, and occupancy-based control sequences managed by the Ra2 system. The brown finish coordinates with standard brown or dark-tone wallplates. Typical applications include living spaces, bedrooms, hallways, and commercial office areas where code-compliant, programmable dimming is required.

Key Features

• Optimized LED+ dimming technology for smooth, flicker-free performance on LED lamp loads
• Wireless RF communication integrates with the Ra2 lighting control system without dedicated control wiring at the switch leg
• Brown finish for coordination with dark-tone wallplates and devices
• Compatible with Ra2 system scenes, schedules, and occupancy-based control sequences
• Single-unit packaging for straightforward per-location procurement

Compatibility

Designed as an OEM-style component for use within Lutron Ra2 and Ra2 Select wireless lighting control systems. No additional specific compatible model numbers were provided in the product data.

Installation Notes

Installation should be performed by a licensed electrician in accordance with the National Electrical Code (NEC) and all applicable local codes. Shut off circuit power at the breaker panel and verify absence of voltage before wiring the device. The dimmer must be commissioned using the Ra2 system setup software or app to associate it with the system processor and assign it to scenes or zones. Do not install without a compatible Ra2 system processor present on the network.