Lubriplate L0704-060 Air Compressor Oil Iso 32 5 Gal

Product Description

The LUBRIPLATE L0704-060 is a mineral-based air compressor oil formulated for use in centrifugal air compressors. It carries an ISO 32 viscosity grade and an SAE 10 rating, making it a light, low-viscosity lubricant suited to high-speed rotating equipment. Supplied in a 5-gallon pail, this oil is part of the Lubriplate AC-0 series. It delivers a Saybolt Universal Viscosity (SUS) of 137 at 100 degrees F and 43 at 210 degrees F, confirming stable flow across a broad temperature range. HVAC and industrial service technicians who maintain rotary or centrifugal air compressor systems will find this oil appropriate for routine fluid maintenance and oil change intervals.

This oil is intended for centrifugal air compressors operating in commercial and industrial settings. The ISO 32 grade is commonly specified for compressor types that require a light lubricant to minimize internal friction and heat buildup in high-speed bearing and gear surfaces. The 5-gallon pail format is practical for service contractors and facility maintenance teams that perform scheduled oil changes on compressor systems. No specific OEM model compatibility is listed in the available product data, so always verify the compressor manufacturer's viscosity requirement before filling.

Key Features

• ISO 32 viscosity grade suited to centrifugal air compressor lubrication
• SAE 10 rating confirms light viscosity appropriate for high-speed rotating components
• SUS viscosity of 137 at 100 degrees F and 43 at 210 degrees F for stable performance across service temperatures
• Colorless to yellow appearance; no dyes or additives that could interfere with compressor seals
• Part of the Lubriplate AC-0 series, a recognized line of compressor lubricants
• 5-gallon pail packaging supports bulk service work and scheduled maintenance programs

Compatibility

Designed for use in centrifugal air compressors where an ISO 32 or SAE 10 grade lubricant is specified by the equipment manufacturer. Confirm OEM viscosity and oil-type requirements before use.

Installation Notes

Oil changes on air compressor systems should be performed by qualified technicians following the compressor manufacturer's service intervals and procedures. Shut down and de-energize the compressor and relieve all system pressure before draining or adding oil. Dispose of used compressor oil in accordance with local environmental regulations. Do not mix with other oils or lubricants unless the compressor manufacturer explicitly permits blending.