Ls Electric 1328000800 Magnetic Contactor 3P 18A 240VAC

Product Description

The LS ELECTRIC 1328000800 is a 3-pole magnetic contactor from the Metasol Series, designed for switching and controlling motor loads in industrial and commercial electrical systems. Rated at 18 amps and 690 volts, it operates on a 240 VAC coil with an inrush coil power of 70 VA and a holding coil power of 9 VA. The unit delivers 7.5 kW of switching capacity at 50/60 Hz, making it suitable for medium-duty motor control applications. Licensed electricians and industrial maintenance technicians are the primary installers for this type of device.

The 1328000800 is suited for use in motor control centers, control panels, and distribution equipment in residential, commercial, and light industrial settings. Its NEMA 1 rating makes it appropriate for indoor, dry-location enclosures. The contactor accepts 14 to 8 AWG wire at screw terminals and mounts on standard DIN rail or via screw mounting, fitting into compact panel layouts. The 18AF frame size is a common footprint in IEC-style contactor applications.

Key Features

• 18A continuous current rating at up to 690 volts for motor and load switching
• 240 VAC coil voltage with 70 VA inrush and 9 VA holding power
• 3NO main contact configuration plus 1NO auxiliary contact
• DIN rail and screw mounting options for flexible panel installation
• Screw terminals accept 14 to 8 AWG wire
• IP20 and NEMA 1 rated for indoor dry-location use
• Rated for 1800 operating cycles with a temperature range of -5 to 55 degrees C

Compatibility

Designed as an OEM-style replacement or direct-fit contactor for IEC-style motor control applications using 18AF frame contactors in the Metasol Series lineup.

Installation Notes

Installation should be performed by a licensed electrician in accordance with NEC requirements and local electrical codes. De-energize and lock out the circuit before servicing or wiring the contactor. Confirm coil voltage at the panel matches the 240 VAC rating before energizing. Verify wire sizing and terminal torque to local code and the panel schedule before closing the enclosure.