Ls Electric 1316000500 Magnetic Contactor 3P 9A 120V

Product Description

The LS ELECTRIC 1316000500 is a 3-pole magnetic contactor from the Metasol Series, rated for 9 amps and designed to switch electrical loads in industrial and commercial control circuits. It operates on a 120 VAC coil voltage with an inrush coil power rating of 70 VA and a holding coil power rating of 9 VA. The contactor features a 3NO main contact configuration and includes a 1NO auxiliary contact, making it suitable for motor control, HVAC equipment, and other power-switching applications. Licensed electricians and controls technicians are the primary installers of this component.

This contactor is intended for use in residential and commercial electrical control panels, motor starters, and HVAC system control circuits where reliable load switching is required. Its compact 18AF frame and dual mounting options support integration into a wide range of enclosure and panel configurations. The 50/60 Hz frequency rating makes it compatible with standard North American power systems. Operating temperature range is -5 to 55 degrees C, supporting both indoor mechanical room and light industrial environments.

Key Features

• 9A amperage rating with 690 V voltage rating for flexible load control
• 120 VAC coil voltage with 70 VA inrush and 9 VA holding coil power
• 3-pole, 3NO main contact configuration with included 1NO auxiliary contact
• DIN rail and screw mounting options for flexible panel installation
• Screw terminal type accepts 16 to 10 AWG wire
• IP20 rated enclosure protection; NEMA 00 rating
• Rated for 1800 operating cycles with 50/60 Hz frequency compatibility

Compatibility

Designed as an OEM-style replacement or new-installation contactor for 3-pole magnetic contactor applications in commercial and industrial control panels using 120 VAC control voltage.

Installation Notes

Installation should be performed by a licensed electrician in accordance with applicable NEC requirements. Disconnect and lock out all power to the panel or enclosure before handling or wiring the contactor. Verify coil voltage at the control circuit matches the 120 VAC rating of this unit before energizing. Screw terminals should be torqued using a calibrated screwdriver appropriate for the AWG wire range specified.