Loctite LOC98455 Mix Nozzle Stepped Tip 50 Ml

Product Description

The LOCTITE LOC98455 is a stepped-tip static mix nozzle designed for use with 50 ml dual-cartridge dispensing systems. The nozzle measures 6 inches in length with a 6mm diameter and contains 21 mixing elements, which ensure thorough blending of two-component adhesives and sealants at the point of application. It is used by HVAC technicians, plumbers, electricians, and general trade professionals who work with two-part formulations requiring consistent mix ratios. The stepped tip design allows direct attachment to compatible Loctite cartridge reservoirs without additional adapters.

This mix nozzle is suited for dispensing two-part adhesives and sealants including acrylic, epoxy, urethane, silicone, anaerobic, and cyanoacrylate formulations from Loctite 50 ml dual-cartridge systems. Typical applications include bonding, sealing, and gasketing tasks across residential and commercial mechanical systems. It is used on the job site wherever a two-component adhesive must be mixed and applied in a controlled, consistent stream. Each nozzle provides a single-use, self-purging mix path that keeps the cartridge tips free of cured material between uses.

Key Features

• 21 internal mixing elements deliver thorough, consistent blending of two-component formulations
• Stepped tip profile fits 50 ml Loctite dual-cartridge reservoirs and dispense systems
• 6 inches in length with 6mm diameter for controlled application reach
• Compatible with acrylic, epoxy, urethane, silicone, anaerobic, and cyanoacrylate adhesives and sealants
• Single-use design keeps cartridge orifices clear of cured residue between applications

Compatibility

Designed for use with Loctite 50 ml dual-cartridge adhesive and sealant dispensing systems. Compatible with acrylic, anaerobic, cyanoacrylate, epoxy, silicone, urethane, hot melt, and other two-component Loctite formulations dispensed from Loctite reservoirs and dispense equipment.

Installation Notes

Attach the nozzle to the cartridge tip prior to dispensing by aligning and pressing firmly until seated. Purge a small amount of mixed material before applying to the work surface to confirm proper mix ratio and flow. This is a single-use consumable item; discard the nozzle after each use to prevent cured material from blocking the mix path. No tools or power shutdown procedures are required for nozzle installation.