Loctite D706522 Structural Adhesive 50 Ml Dual Cartridge

Product Description

The LOCTITE D706522 is a two-part structural adhesive dispensed from a 50 mL dual cartridge at a 1:1 mixing ratio. It is designed for high-strength bonding applications where a rigid, durable joint is required. The adhesive cures to a gray finish and delivers a shear strength of 3500 psi. With a working time of 50 minutes and a fixture time of 180 minutes, it allows adequate positioning time before the joint sets. Full cure is achieved in 24 hours. The D706522 belongs to the LOCTITE 9460 Series and is suited for use by maintenance technicians, industrial assemblers, and tradespeople requiring reliable structural bonds in demanding environments.

This adhesive is appropriate for bonding metals, composites, and similar structural substrates in both light industrial and heavy-duty maintenance applications. The dual cartridge format ensures consistent mix ratios without manual measuring. It is commonly used in equipment repair, structural assembly, and component bonding where high shear strength and temperature resistance are required. The maximum operating temperature of 121 degrees C (250 degrees F) makes it suitable for assemblies exposed to elevated heat in service. Installers in HVAC, electrical, and general mechanical trades use this product for metal and composite bonding tasks encountered during equipment installation or repair.

Key Features

• 50 mL dual cartridge format with 1:1 mixing ratio for consistent, measured dispensing
• 50-minute working time allows precise positioning before the bond sets
• Shear strength of 3500 psi for high-load structural joints
• Maximum operating temperature of 250 degrees F (121 degrees C)
• Full cure in 24 hours; fixture time of 180 minutes
• Gray-colored cure for a clean, low-visibility bond line

Compatibility

Designed as an OEM-style structural bonding adhesive suitable for metals, composites, and rigid substrates in industrial and trade maintenance applications where high shear strength and elevated temperature resistance are required.

Installation Notes

This adhesive is applied by maintenance technicians and tradespeople using a standard dual-cartridge dispensing gun. Surfaces should be clean, dry, and free of oils or contaminants before application. Do not allow the product to enter sewers or waterways during mixing, application, or cleanup. Allow the full 24-hour cure time before placing the joint under load.