Loctite 475441 Structural Adhesive 50 Lb Pail Series 9460

Product Description

The LOCTITE 475441 is a two-component structural adhesive supplied in a 50-pound pail, engineered for heavy-duty bonding applications in commercial and industrial settings. Formulated as part of the Series 9460 line, it delivers a shear strength of 3500 psi and cures to a gray finish. The 1:1 mix ratio simplifies metering and dispensing. With a 50-minute working time and a fixture time of 180 minutes, the adhesive allows adequate open time for positioning large assemblies before setting. Full cure is reached at 24 hours. Installation and structural bonding work is typically performed by industrial mechanics, contractors, or maintenance technicians working on structural assembly or repair tasks.

This adhesive is suited for structural bonding in commercial and industrial environments where extended working time and high shear strength are required. The 50-pound pail format is intended for high-volume or production-scale use. The product must not be allowed to enter sewer systems or waterways, making proper containment and disposal essential on job sites with drainage concerns. It performs in applications exposed to temperatures up to 250 degrees F (121 degrees C), making it viable for environments with elevated heat exposure.

Key Features

• Shear strength of 3500 psi for reliable structural bonds
• 50-minute working time supports positioning of large or complex assemblies
• Fixture time of 180 minutes with full cure at 24 hours
• 1:1 mix ratio simplifies two-component dispensing
• Maximum operating temperature of 250 degrees F (121 degrees C)
• Gray color aids in visual inspection of applied adhesive

Compatibility

Designed as a high-strength structural adhesive for use in industrial and commercial bonding applications where a two-component, pail-format epoxy system is specified.

Installation Notes

This product should be applied by trained personnel familiar with two-component adhesive systems. Ensure all surfaces are clean, dry, and free of contaminants before application. Dispense using equipment compatible with a 1:1 mix ratio to ensure proper cure. Do not allow unmixed or mixed product to enter drains, sewer lines, or waterways — follow applicable local regulations for containment and disposal.