Loctite 237112 Two-part Epoxy Cartridge 400 Ml

Product Description

The LOCTITE 237112 is a two-part epoxy adhesive in a 400 mL cartridge, part of the E-60HP series. It is engineered for high-strength structural bonding in industrial and trade applications. The adhesive delivers a shear strength of 4340 psi and provides a working time of 60 minutes, giving installers adequate open time for part alignment and fixturing. The 100:50 mixing ratio is dispensed directly through the cartridge system, reducing hand-mixing steps and improving consistency. Off-white in color, this epoxy is suited for applications where appearance and cure reliability matter.

The 237112 is used in metal fabrication, plastics assembly, and general industrial repair work. The 60-minute working time supports larger bonding areas or assemblies that require extended positioning. CFIA approval makes it suitable for use in food-processing or regulated facility environments where adhesive contact with equipment surfaces is a concern. Licensed tradespeople working in mechanical, industrial, or facility-maintenance roles are the primary users of this product.

Key Features

• Two-part epoxy formula with 4340 psi shear strength
• 60-minute working time for extended positioning and alignment
• 400 mL cartridge format with 100:50 mixing ratio for consistent dispensing
• Bonds to metal and plastic substrates
• CFIA approved for regulated and food-processing facility environments
• Off-white color for clean, visible bond lines

Compatibility

Designed for bonding metal and plastic substrates. Part of the LOCTITE E-60HP series (series part number 29321). Compatible with standard 400 mL dual-cartridge dispensing guns designed for a 100:50 mix ratio.

Installation Notes

Surface preparation is critical — clean and degrease all bonding surfaces before application. Use a compatible dual-cartridge dispensing gun sized for 400 mL cartridges and the 100:50 mix ratio. Discard the initial bead of mixed adhesive before applying to the work surface to ensure proper ratio from the mixing nozzle. Allow full cure time before applying load to the bonded assembly.