Loctite 1835922 Retaining Compound 10 Ml High Strength

Product Description

The LOCTITE 1835922 is a high-strength, gel-form retaining compound engineered for securing cylindrical assemblies such as bearings, bushings, and slip-fit components. Dispensed from a 10 mL bottle, this green anaerobic gel cures in place when confined between close-tolerance metal surfaces and denied air contact. It delivers a maximum operating temperature of 355 degrees F, making it suitable for mechanical assemblies exposed to elevated heat cycles. The gel consistency controls migration during application, which is particularly useful in vertical or overhead orientations. It belongs to the Loctite 648 Series, known for high shear and tensile strength on fitted metal joints.

This compound is used in industrial and mechanical service applications where permanent, load-bearing retention of press-fit or slip-fit assemblies is required. Typical uses include securing rotor assemblies, pump housings, gear hubs, and bearing races in both light industrial and heavy-duty equipment. Technicians in HVAC, plumbing, and mechanical maintenance apply Series 648 compounds when disassembly is not anticipated, or when thermal cycling demands a robust bond line between metal substrates.

Key Features

• High-strength formulation for permanent retention of cylindrical metal assemblies
• Gel consistency minimizes migration and dripping during application
• Maximum operating temperature of 355 degrees F for heat-exposed assemblies
• Green color provides clear visual confirmation of compound placement
• 24-hour full cure time under standard conditions
• Compact 10 mL bottle format suits bench-top and field service use

Compatibility

Designed for use on close-tolerance cylindrical metal assemblies, including steel, iron, and other active metal substrates; part of the Loctite 648 Series retaining compound line.

Installation Notes

Application is performed by licensed or qualified mechanical technicians following standard anaerobic adhesive procedures. Clean and degrease mating surfaces thoroughly before applying compound to ensure full cure and maximum bond strength. Avoid applying compound to inactive metals such as certain stainless or plated surfaces without an appropriate activator, as cure may be inhibited. Allow a minimum of 24 hours full cure before applying service loads to the assembly.