Lionbeam lbpa36-466 Tv Wall Mount 37-70 Inch 110 Lb

Product Description

The LIONBEAM lbpa36-466 is a full-motion articulating TV wall mount designed for flat-panel televisions ranging from 37 inches to 70 inches in screen size. The mount features a swiveling arm with a tilt range of -20 to +10 degrees and a swivel range of -60 to +60 degrees, allowing installers to dial in the exact viewing angle for the room. A built-in level adjustment with a -3 to +3 degree screen level correction eliminates the need for repeated rehanging. Maximum weight capacity is 110 pounds. Wall profile depth ranges from 2.5 inches to 20.1 inches depending on arm extension. VESA compatibility covers 200x200, 300x300, 400x200, 400x400, and 600x400 hole patterns.

This mount suits residential and light commercial installations where flexible viewing angles are required. Common applications include living rooms, bedrooms, conference rooms, waiting areas, and bar or restaurant installations where the display must be repositioned for different audiences or lighting conditions. The articulating arm design makes it practical in corner installations or rooms where the primary seating is not directly centered on the wall.

Key Features

• Full-motion articulating arm with swivel range of -60 to +60 degrees
• Tilt range of -20 to +10 degrees for glare reduction and elevated placements
• Built-in level adjustment corrects screen pitch up to 3 degrees in either direction
• Supports TVs from 37 inches to 70 inches with a maximum load of 110 pounds
• Compatible with five VESA hole patterns: 200x200, 300x300, 400x200, 400x400, and 600x400
• Low-profile to extended reach: 2.5 inches to 20.1 inches off the wall

Compatibility

Designed for flat-panel televisions from 37 inches to 70 inches in size with VESA mounting hole patterns of 200x200, 300x300, 400x200, 400x400, or 600x400 and a total weight not exceeding 110 pounds.

Installation Notes

Mount installation should be performed by a qualified installer. Locate wall studs before fastening the wall plate, and verify the fasteners used are rated for the combined weight of the mount and display. Power down and disconnect all cables from the television before attaching it to the mount. Confirm the wall surface material and anchor hardware are suitable for the rated load prior to final installation.