Linesets LINE010K0500L Single Line Set 5/8 in Od 50 Ft

Product Description

The LINESETS LINE010K0500L is a pre-assembled single refrigerant line set designed for residential and light commercial mini-split and split-system HVAC installations. It features a 5/8 inch OD copper line with 1/2 inch wall K-Flex Titan NBR/PVC tubular insulation encased in a co-extruded polymeric jacket. The K-Flex Titan jacketing delivers strong resistance to abrasion, UV exposure, and weathering, making it suitable for both indoor and outdoor routing. At 50 feet in length, this line set ships ready to install, reducing job-site prep time for HVAC technicians.

This line set is intended for split-system and ductless mini-split applications where a single suction or liquid line run is required. The 50-foot length accommodates typical residential installations where the condensing unit is mounted away from the air handler or indoor unit. The black insulation color blends with common exterior mounting surfaces. Licensed HVAC technicians install this product as part of a refrigerant circuit between the indoor evaporator and outdoor condensing unit.

Key Features

• 5/8 inch OD copper line construction for standard mini-split and split-system compatibility
• 1/2 inch K-Flex Titan NBR/PVC insulation wall for thermal performance and condensation control
• Co-extruded polymeric outer jacket resists abrasion, UV, and weather exposure
• Fully assembled and ready to install straight from the package
• 50-foot length suits typical residential line set runs
• Black insulation finish for clean exterior appearance

Compatibility

Designed as a single-line refrigerant line set for residential and light commercial split-system and ductless mini-split HVAC applications requiring a 5/8 inch OD copper line with 1/2 inch insulation.

Installation Notes

Installation must be performed by a licensed HVAC technician in accordance with applicable mechanical codes and EPA Section 608 refrigerant handling regulations. Shut off and recover any refrigerant from the system before disconnecting existing line sets. Route the line set to avoid sharp bends that could kink the copper tubing, and support it at intervals per local code requirements. Do not exceed the minimum bend radius specified by the copper tubing manufacturer during routing.

Technical Specifications

• Line OD: 5/8 inches
• Insulation Wall Thickness: 1/2 inches
• Length: 50 feet
• Line Type: Single Line
• Insulation Material: K-Flex Titan NBR/PVC with co-extruded polymeric jacket
• Insulation Color: Black
• UPC: 68576842779

Standard Information

• Brand: LINESETS
• Manufacturer Part Number: LINE010K0500L