Lift-all EN2802TX5 Endless Polyester Sling 2in 5ft 6.20 Ton

Product Description

The LIFT-ALL EN2802TX5 is a Type 5 endless polyester web sling designed for rigging and lifting applications in industrial, construction, and material handling environments. Measuring 2 inches wide and 5 feet long, this sling delivers a vertical lift capacity of 6.20 tons (12,400 pounds) and a choker capacity of 9,900 pounds. Constructed with a 2-ply polyester weave and twisted eyes, it provides reliable load control while resisting abrasion during repeated lifts. Rated for use up to 200 degrees F, it suits a wide range of shop floor and field service conditions. Qualified riggers and lifting equipment operators are the primary installers and users of this sling.

This endless sling is suited for both overhead and below-hook lifting tasks where a continuous loop configuration is required. The twisted eye design allows the sling to seat properly in hooks and shackles, making it a practical choice for vertical, choker, and basket hitch configurations depending on load requirements. It is commonly used in manufacturing facilities, warehouses, steel yards, and construction sites where polyester webbing is preferred to protect finished or coated surfaces.

Key Features

• Endless loop construction eliminates hardware requirements and reduces setup time
• 6.20 ton (12,400 lb) vertical rated capacity with 9,900 lb choker capacity
• 2-ply polyester construction with twisted eyes for secure hook engagement
• Abrasion-resistant material for extended service life in demanding environments
• Rated to 200 degrees F maximum working temperature
• Meets OSHA 1910.184, ASME B30.9, and WSTDA standards

Compatibility

Designed as an OEM-style endless web sling for use with standard hooks, shackles, and lifting hardware rated to match or exceed the sling's working load limit in vertical, choker, or basket hitch configurations.

Installation Notes

Inspection and rigging of this sling must be performed by a qualified rigger in accordance with OSHA 1910.184 and ASME B30.9 requirements. Before each lift, inspect the sling for cuts, abrasion, chemical damage, or broken stitching and remove from service if any defects are found. Never exceed the rated working load limit for the hitch type being used, and ensure all hardware contact points are seated properly before applying load. Do not use this sling on loads with sharp edges without appropriate edge protection.