Lift-all EN2801TX3 Endless Polyester Sling 1 in 3 Ft

Product Description

The LIFT-ALL EN2801TX3 is a Type 5 endless round polyester web sling rated for vertical lift capacity of 6,200 pounds (3.10 tons) and choker capacity of 4,900 pounds. Constructed with a 2-ply polyester body, this sling measures 1 inch wide and 3 feet long, making it a compact, reliable option for precision rigging in tight work envelopes. The twisted eye configuration provides secure hook engagement and load control. Rated for maximum operating temperatures up to 200 degrees F, the polyester construction resists abrasion and protects loads with a non-marring surface. Riggers, ironworkers, and crane operators specify this sling for light to medium lifting tasks across industrial and construction jobsites.

This sling is suited for single-leg vertical and choker hitch configurations in general rigging applications. The 3-foot length is commonly used for overhead lifts, machinery placement, and material handling where a compact sling is needed. The abrasion-resistant polyester construction makes it a practical choice for both smooth and finished load surfaces. Applications span manufacturing facilities, steel erection, HVAC equipment placement, and similar trades requiring controlled, repeatable lifts at moderate load ratings.

Key Features

• 6,200 lb vertical capacity and 4,900 lb choker capacity for light to medium rigging tasks
• 2-ply polyester body provides abrasion resistance and protects finished load surfaces
• Twisted eye design for positive hook engagement in vertical and choker hitches
• Rated to 200 degrees F maximum operating temperature
• Compliant with OSHA 1910.184, ASME B30.9, and WSTDA standards
• Compact 1-inch width and 3-foot length for use in confined or precision lift scenarios

Compatibility

Designed as an OEM-style endless web sling for use with standard rigging hardware including hooks and shackles conforming to ASME B30.9 and OSHA 1910.184 requirements for synthetic sling applications.

Installation Notes

Installation and use should be performed by a qualified rigger familiar with ASME B30.9 synthetic sling standards and OSHA 1910.184 requirements. Inspect the sling for cuts, abrasions, heat damage, or chemical degradation before each use and remove from service immediately if any defects are found. Never exceed the rated capacity for the hitch type in use, and ensure the sling is properly seated in the hook saddle before applying load. Avoid contact with sharp edges without protective padding and keep clear of chemicals that may degrade polyester fibers.