Lift-all EN2602DX5 Endless Sling 9600 Lb 2in X 5ft Polyester

Product Description

The LIFT-ALL EN2602DX5 is a Type 5 endless round sling engineered for rigging and lifting applications where a continuous loop configuration is required. Constructed from polyester and finished in yellow, this 2-ply sling measures 2 inches wide and 5 feet long. It carries a vertical capacity of 9,600 pounds (4.80 tons), a choker capacity of 7,700 pounds, and a basket capacity of 19,200 pounds. The polyester construction provides abrasion resistance and is rated for use in temperatures up to 200 degrees F. Licensed riggers, millwrights, and crane operators are the primary installers of this type of sling in industrial and construction environments.

This endless sling is suited for single-leg vertical lifts, choker hitches, and basket hitches on structural steel, machinery, and other industrial loads. The endless loop design eliminates hardware end fittings, distributing load stress across the full sling body. It is appropriate for both overhead lifting and load-securing tasks in manufacturing plants, warehouses, construction sites, and shipyards where polyester web slings are specified. The yellow color conforms to industry color-coding conventions for identifying sling capacity and material type.

Key Features

• Endless Type 5 loop construction with no metal end hardware
• 9,600 lb vertical capacity, 7,700 lb choker capacity, and 19,200 lb basket capacity
• 2-ply polyester construction rated to 200 degrees F maximum service temperature
• Abrasion-resistant polyester material for extended service life in rough environments
• Meets OSHA 1910.184, ASME B30.9, and WSTDA standards

Compatibility

Designed as a standard Type 5 endless polyester web sling suitable for use with compatible overhead lifting equipment and rigging hardware rated for the corresponding load capacities.

Installation Notes

Installation and use must be performed by a qualified rigger in accordance with OSHA 1910.184 and ASME B30.9. Inspect the sling for cuts, abrasion, UV damage, or chemical exposure before each use and remove from service if defects are found. Never exceed the rated working load limits for the hitch configuration in use. Ensure the load contact area is free of sharp edges that could cut or abrade the sling body during the lift.