Lift-all EN1802TX4 Endless Web Sling 2in 4ft 3.20 Ton

Product Description

The LIFT-ALL EN1802TX4 is a Type 5 endless web sling designed for rigging and lifting applications in industrial, construction, and material-handling environments. Constructed from a single-ply polyester weave, this sling measures 2 inches wide and 4 feet in length, with a rated vertical capacity of 3.20 tons (6,400 pounds). The twisted eye configuration allows the sling to wrap loads at an angle without creating flat-on-flat contact points that can abrade the webbing. Riggers, millwrights, and industrial maintenance crews rely on slings like this for controlled load placement where wire rope or chain would damage a finished surface.

This sling is suited for single-leg vertical lifts and choker hitches in general industrial rigging. In choker configuration, the rated capacity drops to 5,000 pounds, consistent with ASME and OSHA reduction factors for that hitch type. The gray and blue color combination is a standard LIFT-ALL designation. The sling is rated for use in environments up to 200 degrees F and carries abrasion-resistant construction for repeated service in rough-edged load scenarios.

Key Features

• Type 5 endless configuration — no metal hardware to contact or mar load surfaces
• 3.20-ton (6,400 lb) vertical capacity; 5,000 lb choker capacity
• Single-ply polyester construction with abrasion-resistant properties
• Twisted eye design for angled engagement without flat-contact pressure points
• Rated to 200 degrees F maximum operating temperature
• Meets OSHA 1910.184, ASME B30.9, and WSTDA standards

Compatibility

Designed as a standard endless polyester web sling for use with hooks, shackles, and lifting beams that accept 2-inch-wide webbing in single-leg rigging configurations.

Installation Notes

Inspection before each lift is required under OSHA 1910.184 — check for cuts, abrasions, heat damage, and chemical degradation before use. Ensure the hook or attachment hardware is properly seated in the twisted eye and that the rated capacity is not exceeded for the chosen hitch type. Do not use this sling in contact with sharp edges without protective padding. Sling removal and storage should follow WSTDA and ASME B30.9 guidelines; retire the sling immediately if any structural damage is found.