Lift-all EN1801TX7 Endless Sling 1.60 Ton 1 in 7 Ft Polyester

Product Description

The LIFT-ALL EN1801TX7 is a single-ply endless round sling rated for 1.60 tons (3,200 pounds) in vertical lift configuration. Constructed from polyester webbing, this Type 5 endless sling measures 1 inch wide and 7 feet in length. The twisted eye design allows for secure rigging in vertical, choker, and basket hitch configurations. Rated for a choker capacity of 2,500 pounds, the sling is suitable for a wide range of general rigging and lifting applications. It is installed and used by riggers, millwrights, and maintenance crews across industrial, construction, and manufacturing environments. The gray and blue color coding aids in quick load-rating identification on the job site.

This endless sling is designed for use in applications where a continuous loop configuration is required, such as lifting machinery, structural components, pipe, and other industrial loads. The polyester material offers resistance to abrasion and performs in temperatures up to 200 degrees F. It is well suited for both shop and field rigging operations where a lightweight, flexible, and durable synthetic sling is needed in place of wire rope or chain. Single-leg rigging in vertical hitch is its primary use case, though twisted eye geometry also supports choker and basket configurations.

Key Features

• 1.60-ton vertical capacity (3,200 pounds) with 2,500-pound choker capacity
• Type 5 endless construction — no hardware, continuous loop design
• Single-ply polyester webbing with abrasion-resistant properties
• Twisted eye geometry supports vertical, choker, and basket hitch use
• Rated for use up to 200 degrees F
• Meets OSHA 1910.184, ASME B30.9, and WSTDA standards

Compatibility

Designed as a general-purpose synthetic endless sling compatible with standard rigging hardware, crane hooks, and lifting fixtures used in vertical, choker, and basket hitch applications. No specific equipment model compatibility was specified by the manufacturer for this part.

Installation Notes

Rigging and installation should be performed by a qualified rigger familiar with OSHA 1910.184 and ASME B30.9 requirements. Inspect the sling for cuts, abrasion, UV degradation, or chemical damage before each use and remove from service if any damage is found. Never exceed the rated load capacity for the hitch type being used, and ensure the load is fully seated in the sling before initiating any lift. Do not use this sling in contact with sharp edges without protective padding.