Lift-all EE2806TTX10 Eye Eye Polyester Sling 6in 10ft

Product Description

The LIFT-ALL EE2806TTX10 is a two-ply polyester flat web sling configured in an eye-and-eye arrangement with twisted and tapered eyes on both ends. It measures 6 inches wide and 10 feet long, delivering a vertical lift capacity of 16,500 pounds (8.25 tons) and a choker capacity of 13,200 pounds. Built for single-leg rigging, this sling is rated to OSHA 1910.184 and ASME B30.9 standards, making it a compliant choice for industrial and construction lifting operations. The polyester webbing provides abrasion resistance and color-coded gray and blue identification for quick load-rating verification on the job site.

This sling is suited for general-purpose rigging in manufacturing, warehousing, construction, and heavy industrial environments where a single-leg flat web sling is required. The twisted tapered eye design seats cleanly on hooks and shackles, reducing slippage during picks. It is appropriate for use in applications where the load must be protected from damage and where operating temperatures do not exceed 200 degrees F. Riggers and crane operators working with overhead lifting equipment in single-leg vertical or choker hitches will find this a direct-fit solution for moderate to heavy lifts.

Key Features

• Twisted and tapered eyes on both ends for secure hook and shackle engagement
• Two-ply polyester webbing construction for abrasion resistance and load protection
• 16,500 lb vertical capacity and 13,200 lb choker capacity in single-leg configuration
• Rated for use up to 200 degrees F maximum operating temperature
• Meets OSHA 1910.184, ASME B30.9, and WSTDA standards
• Gray and blue color coding for fast visual load-rating identification

Compatibility

Designed as a standard eye-and-eye flat web sling for single-leg rigging applications compatible with hooks, shackles, and lifting hardware sized for a 6-inch-wide polyester sling.

Installation Notes

This sling must be installed and used by qualified riggers familiar with OSHA 1910.184 and ASME B30.9 rigging requirements. Inspect the sling for cuts, abrasions, UV degradation, and chemical damage before each use and remove from service if any damage is found. Never exceed the rated capacity for the intended hitch type, and ensure all hardware contact points are free of sharp edges that could damage the webbing. Do not use this sling outside its rated temperature range or expose it to acids, caustics, or other chemicals without consulting the manufacturer.