Lift-all EE2806DFX10 Polyester Eye Eye Sling 6in 10ft

Product Description

The LIFT-ALL EE2806DFX10 is a two-ply polyester flat web eye-and-eye lifting sling rated for a 16,500 lb vertical working load limit. Built to Type 3 flat eye-and-eye construction, the sling features flat and tapered eyes at both ends and a yellow web body for fast visual identification. It measures 6 inches wide and 10 feet long, making it well-suited for medium-to-heavy rigging applications where a stable, broad-contact lift is required. The polyester construction provides abrasion resistance and limits stretch under load, protecting both the sling and the load surface during lifts.

This sling is used in industrial and commercial rigging operations where a single-leg vertical or choker hitch is required. At a 13,200 lb choker capacity, it handles demanding pick-and-carry tasks on structural steel, machinery, precast concrete, and similar loads. Licensed riggers and qualified rigging crews in manufacturing, construction, and heavy-equipment service environments are the typical installers. The flat web design distributes load pressure evenly, reducing the risk of load surface damage on finished or coated materials.

Key Features

• 16,500 lb vertical working load limit with a 13,200 lb choker capacity
• Two-ply polyester flat web construction for load surface protection and abrasion resistance
• Flat and tapered eyes at both ends for easy hook and shackle attachment
• 6 inches wide by 10 feet long for broad load contact on medium-to-heavy lifts
• Rated for use up to 200 degrees F continuous service temperature
• Meets OSHA 1910.184, ASME B30.9, and WSTDA standards
• Yellow color for quick visual identification during rigging operations

Compatibility

Designed as an OEM-style Type 3 flat eye-and-eye polyester web sling for single-leg vertical and choker hitch applications in industrial and commercial rigging where OSHA 1910.184 and ASME B30.9 compliance is required.

Installation Notes

Installation and use must be performed by a qualified rigger familiar with ASME B30.9 and OSHA 1910.184 requirements. Inspect the sling for cuts, abrasion, UV degradation, and ply separation before each use, and remove from service if any damage is found. Do not exceed the working load limits for the hitch type in use, and never use the sling above its 200 degrees F maximum service temperature. Sharp edges or corners should be padded to prevent cutting or abrasion of the web during the lift.