Lift-all EE2803TFX12 Eye Eye Polyester Sling 3 in 12 Ft

Product Description

The LIFT-ALL EE2803TFX12 is a flat eye-and-eye polyester web sling engineered for overhead lifting applications where load protection and rated capacity reliability are critical. This Type 3 sling is 3 inches wide and 12 feet long, with a vertical rated capacity of 8,800 pounds and a choker capacity of 7,040 pounds. Constructed with a 2-ply flat web design, it delivers consistent load control with flat and tapered eyes at both ends. The polyester construction offers natural resistance to many common chemicals and minimizes load surface damage. Rigging crews, millwrights, and material handlers install and use this sling in industrial, construction, and warehouse environments.

This sling suits single-leg vertical and choker hitch configurations in general-purpose overhead lifting scenarios. The flat web body distributes load force evenly, making it appropriate for machinery, structural components, and equipment lifts where surface contact area matters. The gray and blue color coding assists with quick capacity and material identification on the job site. It is rated for use in environments with temperatures up to 200 degrees F, supporting a range of indoor and outdoor applications.

Key Features

• Vertical rated capacity of 8,800 pounds; choker rated capacity of 7,040 pounds
• 3-inch-wide, 2-ply flat polyester web construction for load surface protection
• Flat and tapered eyes at both ends for secure hardware attachment
• Abrasion-resistant material for extended service life in demanding environments
• Rated for continuous use up to 200 degrees F
• Meets OSHA 1910.184, ASME B30.9, and WSTDA standards

Compatibility

Designed as a general-purpose flat eye-and-eye polyester web sling suitable for single-leg overhead lifting rigging setups using standard hooks, shackles, and lifting hardware compatible with a 3-inch-wide flat eye sling.

Installation Notes

Rigging and installation should be performed by a qualified rigger familiar with ASME B30.9 sling standards and OSHA 1910.184 regulations. Inspect the sling for cuts, abrasions, broken fibers, and discoloration before each use and remove from service if damage is found. Never exceed the rated capacity for the hitch type being used, and avoid sharp edges, abrasive surfaces, or contact with incompatible chemicals without appropriate edge protection. Store slings away from direct sunlight, heat sources, and corrosive materials when not in use.