Lift-all EE2803DTX4 Polyester Eye Eye Sling 4 Ft

Product Description

The LIFT-ALL EE2803DTX4 is a two-ply polyester eye-and-eye lifting sling designed for single-leg rigging applications in industrial, construction, and manufacturing environments. The sling measures 3 inches wide and 4 feet long, with a vertical lift capacity of 8,800 pounds (4.40 tons) and a choker rigging capacity of 7,040 pounds. Twisted and tapered eyes on both ends allow for easy hook attachment and proper load positioning. Rated to a maximum working temperature of 200 degrees F, this sling maintains integrity across a range of job site conditions. Color is yellow for visual identification during inspection.

This sling is suited for general-purpose overhead lifting where a single-leg, eye-and-eye configuration is required. Typical applications include material handling in fabrication shops, warehouses, and on construction sites. The polyester webbing construction resists abrasion and helps protect finished or delicate loads from surface damage during lifts. It is installed and operated by qualified riggers and is appropriate for use with standard hooks, shackles, and lifting hardware.

Key Features

• Vertical capacity: 8,800 pounds (4.40 tons)
• Choker capacity: 7,040 pounds
• Two-ply polyester construction with abrasion-resistant properties
• Twisted and tapered eye ends for secure hook engagement
• Rated for use up to 200 degrees F
• Compliant with OSHA 1910.184, ASME B30.9, and WSTDA standards
• Yellow color for easy visual inspection and load identification

Compatibility

Designed for use as a single-leg eye-and-eye overhead lifting sling compatible with standard rigging hardware including hooks, shackles, and lifting beams rated for the corresponding load capacity.

Installation Notes

Installation and operation must be performed by a qualified rigger in accordance with OSHA 1910.184 and ASME B30.9. Inspect the sling for cuts, abrasion, broken fibers, or chemical damage before each use and remove from service if any defect is found. Never exceed the rated working load limit for the hitch configuration in use. Store away from direct sunlight, heat sources, and corrosive chemicals when not in use.