Lift-all EE2802TTX6 Polyester Web Sling 2in 6ft 12800lb

Product Description

The LIFT-ALL EE2802TTX6 is a two-ply polyester web sling with a twisted eye-and-eye configuration, rated for 12,800 pounds in a vertical hitch when used as a single-leg lift. The sling measures 2 inches wide and 6 feet long, making it well suited for mid-range rigging tasks in fabrication, construction, and general industrial lifting. Constructed from abrasion-resistant polyester webbing, it carries a vertical capacity of 6,400 pounds per ply and a choker capacity of 5,000 pounds. The twisted eyes allow the sling to seat properly on hooks and shackles without distorting the load path. Licensed riggers and lifting crews install this sling where a soft synthetic option is needed to protect finished or sensitive load surfaces.

This sling is designed for use in single-leg vertical and choker hitch configurations in industrial, warehouse, and construction environments. The polyester construction resists common shop fluids and maintains rated capacity up to 200 degrees F, making it serviceable in most standard working conditions. The gray and blue color coding supports visual inspection routines required under ASME B30.9 and OSHA 1910.184. It is appropriate for both overhead lifting and rigging assist work where a 2-inch-wide, 6-foot-length reaches the required span.

Key Features

• Twisted eye-and-eye (Type 4) design seats securely on hooks and shackles
• Vertical capacity of 12,800 pounds; choker capacity of 5,000 pounds
• Two-ply polyester webbing with abrasion-resistant construction
• Rated for use up to 200 degrees F
• Meets OSHA 1910.184, ASME B30.9, and WSTDA standards
• Gray and blue color coding supports standard inspection protocols

Compatibility

Designed for use with standard rigging hardware including hooks, shackles, and lifting beams sized for 2-inch-wide web slings. Suitable as an OEM-style or replacement synthetic sling in single-leg overhead lifting applications.

Installation Notes

Installation and use must be performed by or under the supervision of a qualified rigger familiar with ASME B30.9 and OSHA 1910.184 requirements. Inspect the sling before each use for cuts, abrasion, chemical damage, and distorted eyes; remove from service immediately if damage is found. Never exceed the rated capacity for the hitch type in use, and do not use this sling as a tie-down or tow strap. Avoid sharp edges on the load that could cut the webbing; use edge protection when contact with corners or edges is unavoidable.