Lift-all EE2802DTX4 Eye Eye Polyester Sling 2in 4ft

Product Description

The LIFT-ALL EE2802DTX4 is a two-ply polyester web sling configured in an eye-and-eye (twisted eye) arrangement, designed for single-leg rigging applications in vertical, choker, and basket hitches. At 2 inches wide and 4 feet long, this sling carries a vertical capacity of 12,800 pounds and a choker capacity of 5,000 pounds. Constructed from abrasion-resistant polyester webbing, it is suited for use in environments where load protection and chemical resistance are priorities. The yellow color coding aligns with industry standards for quick identification in the field. Riggers, millwrights, and crane operators working in industrial, construction, and warehouse settings are the primary installers.

This sling is used in single-leg lifting configurations across a range of commercial and industrial applications, including machinery moving, structural steel erection, and material handling in manufacturing or distribution facilities. The twisted eye ends allow the sling to seat properly in hooks and shackles without pinching or distorting the webbing under load. Its 4-foot length makes it appropriate for moderate-reach lifts where a shorter, controlled sling geometry is required. The 2-ply construction adds load capacity and durability over single-ply alternatives.

Key Features

• 12,800 lb vertical capacity with two-ply polyester webbing construction
• 5,000 lb choker capacity for angled and wrap-style hitch configurations
• Twisted eye-and-eye (Type 4) ends seat cleanly in hooks and shackles
• Abrasion-resistant polyester material protects both sling and load surface
• Rated for use up to 200 degrees F continuous operating temperature
• Compliant with OSHA 1910.184, ASME B30.9, and WSTDA standards

Compatibility

Designed as an OEM-style replacement or direct-use lifting sling compatible with standard rigging hardware including hooks, shackles, and lifting rings sized for 2-inch wide web slings.

Installation Notes

Installation and use must be performed by a qualified rigger familiar with ASME B30.9 rigging standards and OSHA 1910.184 requirements. Inspect the sling before each use for cuts, abrasion, UV degradation, chemical exposure, or distorted eyes and remove from service if any defects are found. Never exceed the rated load capacity for the hitch type in use, and account for sling angle derating when the lift is not vertical. Do not use this sling in contact with sharp edges without appropriate edge protection.