Lift-all EE2802DTX12 Eye Eye Polyester Sling 2in 12ft

Product Description

The LIFT-ALL EE2802DTX12 is a two-ply polyester web sling with a twisted eye-and-eye configuration, designed for single-leg overhead lifting in industrial and rigging applications. The sling measures 2 inches wide and 12 feet long, with a vertical lift capacity of 12,800 pounds and a choker capacity of 5,000 pounds. Constructed from polyester webbing, it resists abrasion under routine use and is rated for service in environments up to 200 degrees F. Riggers and millwrights use this type of sling where a soft sling is preferred to protect finished or delicate load surfaces.

This sling is suited for single-leg vertical and choker hitches in manufacturing, warehousing, construction, and maintenance environments. The twisted eye design allows the hook or shackle to seat naturally without binding, which keeps the load path straight during the lift. Yellow color provides visual identification on the job site, consistent with standard color-coding practices for polyester web slings. It ships as a single unit and is appropriate for both recurring production lifting tasks and occasional maintenance picks where rated textile slings are required.

Key Features

• Twisted eye-and-eye (Type 4) configuration for positive hook engagement
• Two-ply polyester construction rated to 12,800 lb vertical capacity
• Choker hitch capacity of 5,000 lb
• Abrasion-resistant polyester webbing
• Rated for use up to 200 degrees F
• Compliant with OSHA 1910.184, ASME B30.9, and WSTDA standards

Compatibility

Designed as a standard eye-and-eye polyester web sling for use with hooks, shackles, and rigging hardware sized for 2-inch webbing in single-leg vertical or choker hitch configurations.

Installation Notes

This sling must be inspected before each use per ASME B30.9 and OSHA 1910.184 requirements. Remove the sling from service if cuts, tears, discoloration, or distortion of the eyes are present. Never exceed the rated load capacity for the hitch type being used, and ensure all rigging hardware is rated to match or exceed the sling capacity. Only qualified riggers should make up and execute overhead lifts using this equipment.