Lift-all EE2802DFX16 Flat Eye Polyester Sling 2in 16ft

Product Description

The LIFT-ALL EE2802DFX16 is a two-ply flat eye-and-eye polyester web sling designed for single-leg overhead lifting in industrial and rigging applications. The sling measures 2 inches wide and 16 feet long, with a vertical rated capacity of 6,400 pounds and a choker rated capacity of 5,000 pounds. Constructed from polyester webbing, it provides abrasion resistance and gentle load contact, reducing the risk of surface damage on finished or coated materials. The flat eye configuration at both ends allows quick connection to hooks, shackles, and lifting hardware. Rigging professionals and qualified lift planners are the primary users of this product.

This sling is suited for single-leg vertical and choker hitches in general industrial, manufacturing, and construction rigging. The flat eye-and-eye design fits standard single-point lifts where load control and rated capacity compliance are required. The polyester construction makes it a practical choice in environments where mild chemical exposure or moisture contact is possible, though users should always consult the load chart and applicable standards before each lift. The yellow color coding aids in quick visual identification on the job site.

Key Features

• Two-ply polyester webbing construction with abrasion-resistant properties
• Flat eye at both ends for compatibility with hooks, shackles, and lifting hardware
• 6,400 lb vertical rated capacity and 5,000 lb choker rated capacity
• Maximum service temperature of 200 degrees F
• Meets OSHA 1910.184, ASME B30.9, and WSTDA standards
• Yellow color for easy visual identification and inspection

Compatibility

Designed as an OEM-style flat eye-and-eye web sling compatible with standard rigging hardware including hooks and shackles rated for the corresponding load capacity. No specific equipment model compatibility is stated by the manufacturer for this sling.

Installation Notes

Installation and use of this sling must be performed by a qualified rigger in accordance with OSHA 1910.184 and ASME B30.9. Inspect the sling before each use for cuts, abrasions, heat damage, or chemical degradation, and remove from service if any defects are found. Never exceed the rated capacity for the hitch type in use, and ensure all connecting hardware is rated to match or exceed the sling capacity. Do not use this sling above 200 degrees F or expose it to strong acids or alkalis without consulting the manufacturer.