Lift-all EE1801TFX5 Flat Eye Polyester Sling 1in 5ft

Product Description

The LIFT-ALL EE1801TFX5 is a single-ply, flat eye-and-eye polyester web sling rated for vertical lifting and rigging applications. Constructed from polyester webbing with flat eye terminations at both ends, this sling measures 1 inch wide and 5 feet long with a vertical lift capacity of 1,600 pounds and a choker capacity of 1,280 pounds. Designed for Type 3 sling configuration, it meets OSHA 1910.184, ASME B30.9, and WSTDA standards. Rated for use in temperatures up to 200 degrees F, it carries abrasion-resistant construction suited for demanding job-site conditions. Riggers, millwrights, and general contractors install this sling for material handling, equipment positioning, and load securing tasks.

This sling is appropriate for light to medium-duty vertical and choker hitch rigging in industrial, construction, and maintenance environments. The flat eye design allows straightforward attachment to hooks, shackles, and lifting points without the need for additional hardware adapters. At 1 inch wide and 5 feet in length, it suits confined lift points and shorter lift distances where a compact, lightweight sling is preferred. It weighs 0.85 pounds, making it easy to handle and transport to elevated or restricted work areas.

Key Features

• Flat eye-and-eye (Type 3) configuration for versatile hitch arrangements
• 1,600 lb vertical capacity and 1,280 lb choker capacity
• Single-ply polyester webbing rated to 200 degrees F maximum working temperature
• Abrasion-resistant construction for extended service life in rough environments
• Compliant with OSHA 1910.184, ASME B30.9, and WSTDA standards
• Lightweight at 0.85 pounds for easy handling on the job site

Compatibility

Designed as a standard flat eye-and-eye polyester web sling for use with compatible hooks, shackles, and lifting hardware rated at or above the sling working load limit.

Installation Notes

Rigging and lifting operations must be performed by qualified personnel in accordance with OSHA 1910.184 and ASME B30.9 requirements. Inspect the sling for cuts, abrasions, discoloration, or distortion before each use and remove from service if any damage is found. Never exceed the rated working load limit for the hitch type in use, and ensure all attached hardware is rated to match or exceed the sling capacity. Do not use this sling in contact with sharp edges without appropriate edge protection.