Lifesafety Power FPO150-C8D8E2 Access Power Supply 150W

Product Description

The LIFESAFETY POWER FPO150-C8D8E2 is a 150-watt access control power supply designed to deliver regulated power to locking hardware and auxiliary devices in electronic access control systems. It provides 12 amps at 12 volts and 6 amps at 24 volts, with 8 dedicated lock outputs and 8 auxiliary outputs. This unit is built for installations where multiple door controllers, electric strikes, magnetic locks, or other access hardware must be powered from a single, centralized supply. It is typically specified and installed by licensed low-voltage or security system technicians.

The FPO150-C8D8E2 is suited for commercial and light-industrial access control deployments where a high output count and dual-voltage capability are required. The 8 lock outputs and 8 auxiliary outputs make it practical for multi-door panels, elevator control applications, and distributed locking systems. It fits into enclosures and panels as part of a structured access power distribution architecture, reducing field wiring complexity compared to per-door power supplies.

Key Features

• 150-watt total output capacity supports multi-door access control loads
• Dual-voltage output: 12 amps at 12 volts and 6 amps at 24 volts
• 8 independently fused or switched lock outputs for electric strikes and magnetic locks
• 8 auxiliary outputs for readers, request-to-exit devices, or ancillary hardware
• Centralized power distribution reduces homerun wiring and simplifies troubleshooting

Compatibility

Designed as an OEM-style replacement or new-installation power supply for commercial electronic access control systems requiring dual 12-volt and 24-volt locking power distribution with multiple independently controlled outputs.

Installation Notes

Installation should be performed by a licensed low-voltage or security systems technician in accordance with applicable local codes and NFPA 70 (NEC) requirements for Class 2 power-limited circuits. Power down the entire access control panel and disconnect all locking hardware before wiring or replacing this unit. Verify that the combined load across all lock and auxiliary outputs does not exceed the rated output capacity of 150 watts. Confirm output voltage selection matches the connected hardware before applying power.