Lifesafety Power FPO150-C82D8PE6M/P8-A Access Power Supply

Product Description

The LIFESAFETY POWER FPO150-C82D8PE6M/P8-A is a 150-watt access control power supply designed to provide managed, distributed power to electronic locking hardware and auxiliary devices in commercial security installations. Rated at 150 watts, it supports up to 8 individually fused lock outputs and 16 auxiliary outputs, making it well suited for mid-to-large access control panels where clean, regulated power distribution is critical. Licensed security integrators and low-voltage electricians install this unit as part of a complete access control system build-out.

This power supply is intended for commercial and light industrial applications where multiple electric strikes, magnetic locks, or electrified hardware must be powered from a single, centralized source. The fused lock outputs provide individual circuit protection, reducing troubleshooting time when a single device faults. The 16 auxiliary outputs extend the supply's usefulness to ancillary devices such as request-to-exit sensors, door position switches, and alarm inputs. It is typically mounted in an enclosure near the access control panel in IT rooms, mechanical rooms, or secured telecom closets.

Key Features

• 150-watt total power output for high-demand multi-door deployments
• 8 individually fused lock outputs for per-circuit overcurrent protection
• 16 auxiliary outputs to power ancillary access control devices
• Designed for centralized power distribution in commercial access control systems
• Sold as a single unit (EA), compatible with standard enclosure-based panel builds

Compatibility

Designed as an OEM-style power distribution unit for commercial access control systems requiring centralized, fused lock and auxiliary power outputs. No specific compatible panel models were provided in the product data.

Installation Notes

Installation should be performed by a licensed low-voltage electrician or certified security integrator in accordance with applicable NEC low-voltage wiring requirements. Disconnect all power to the access control system before wiring lock outputs or auxiliary circuits to this supply. Verify that the total connected load does not exceed the 150-watt output rating before commissioning. Individual fuse ratings on lock output circuits should be confirmed against the inrush and hold current specifications of each connected locking device.