Leviton Telcom WDR15-I Decora Plus Duplex Receptacle

Product Description

The LEVITON TELCOM WDR15-I is a Decora-style duplex electrical receptacle rated for 15 amps at 125 volts with a 2-pole, 3-wire NEMA 5-15R configuration. Finished in ivory, it features the flush, smooth-face Decora form factor commonly specified in residential and light commercial wiring projects. Electricians install this outlet as a standard general-purpose receptacle in new construction, renovation, and device replacement applications. The 2-pole, 3-wire grounded design meets typical branch-circuit requirements for 15-amp, 125-volt circuits found throughout residential and commercial settings.

This receptacle is suited for standard 15-amp branch circuits in residential homes, offices, hotels, and light commercial buildings. It fits single-gang and multi-gang Decora wallplate configurations, making it a straightforward drop-in solution when upgrading or replacing existing duplex outlets. Licensed electricians and electrical contractors routinely specify this outlet during rough-in and trim-out phases of construction as well as during service calls for receptacle replacement.

Key Features

• Decora-style flush face for use with Decora wallplates and multi-gang configurations
• 15-amp, 125-volt rating suitable for standard residential and light commercial branch circuits
• NEMA 5-15R grounded 2-pole, 3-wire outlet configuration
• Ivory finish for neutral, widely accepted aesthetic in residential and commercial interiors
• Sold individually, one receptacle per unit

Compatibility

Designed as an OEM-style replacement for standard 15-amp duplex receptacle applications in single-gang or multi-gang Decora wallplate installations on 15-amp, 125-volt grounded branch circuits.

Installation Notes

Installation must be performed by a licensed electrician in accordance with the National Electrical Code (NEC) and applicable local codes. De-energize the circuit at the breaker panel and verify the circuit is dead with a non-contact voltage tester before removing the existing receptacle or making any wiring connections. Verify the box fill and circuit amperage rating before installing. Do not install on circuits exceeding the receptacle amperage rating.