Leviton Telcom ODS15-GDW Smart Ble Pir Occupancy Sensor Dimmer

Product Description

The LEVITON TELCOM ODS15-GDW is a smart wall-box occupancy sensor with Bluetooth Low Energy (BLE) connectivity and passive infrared (PIR) detection, rated at 1000 watts for dimming applications. Designed for use in commercial and residential settings, this device combines motion-triggered occupancy sensing with integrated dimmer control in a single wall-box unit. Licensed electricians install this device as part of energy management and lighting automation systems, replacing standard dimmer switches where occupancy-based load control is required. The BLE interface allows wireless configuration and integration with compatible smart lighting platforms without additional wiring.

The ODS15-GDW is suited for retrofit and new-construction wall-box installations where automated lighting control is needed. Typical applications include private offices, conference rooms, classrooms, hotel rooms, and similar single-zone spaces that benefit from combined occupancy sensing and dimmer functionality. The device mounts in a standard single-gang electrical box, making it a direct replacement for conventional dimmer switches in upgrade projects. It is intended for installation by qualified electrical contractors following applicable NEC requirements.

Key Features

• Passive infrared (PIR) occupancy detection triggers and dims lighting based on room presence
• 1000-watt dimmer rating supports a wide range of dimmable lighting loads
• Bluetooth Low Energy (BLE) enables wireless setup and control without dedicated low-voltage communication wiring
• Wall-box form factor installs in a standard single-gang box for straightforward retrofit or new-construction deployment
• Combined sensor and dimmer in one device reduces the number of devices and wall-box cutouts required

Compatibility

Designed as an OEM-style replacement or upgrade device for standard single-gang wall-box dimmer installations in residential and commercial lighting control applications.

Installation Notes

Installation must be performed by a licensed electrician in accordance with NEC requirements and all applicable local codes. De-energize the circuit at the breaker panel and verify absence of voltage with a meter before beginning any wiring work. The device is mounted in a standard single-gang electrical box; verify box depth and load wire gauge are compatible before installation. Do not exceed the 1000-watt load rating, and confirm the connected lighting load is dimmable and compatible with the sensor before powering the circuit.