Leviton Telcom L8542-100 Pull Grip Load Sealing Entry

Product Description

The LEVITON TELCOM L8542-100 is a pull grip with load sealing entry, designed to support and strain-relieve cables during installation in conduit and raceway systems. This hardware accessory accepts cable outside diameters ranging from 0.5 inches to 0.75 inches and uses a single wave grip configuration to distribute pulling tension evenly across the cable jacket. Electricians and low-voltage installers use this type of pull grip when fishing cable through conduit runs, overhead trays, or vertical risers where controlled tension and jacket protection are required.

This pull grip is suited for residential and light commercial wiring applications where single cables in the 0.5 to 0.75 inch OD range need to be pulled without damaging the jacket or internal conductors. The sealing entry design helps keep the grip seated and aligned at the conduit opening during the pull. It is sold individually and is typically used by electricians or low-voltage technicians installing data, communication, or power cable.

Key Features

• Load sealing entry holds the grip in position at the conduit mouth during cable pulls
• Single wave grip pattern distributes pulling tension along the cable jacket
• Compatible with cable outside diameters from 0.5 inches to 0.75 inches
• Sold as an individual unit for single-cable pull applications
• Classified as a hardware accessory for conduit and raceway installations

Compatibility

Designed as a hardware accessory for single-cable conduit pull applications where the cable outside diameter falls between 0.5 inches and 0.75 inches.

Installation Notes

Installation is typically performed by a licensed electrician or low-voltage technician. De-energize all circuits in the conduit run before beginning work and verify lockout/tagout procedures are followed. Attach the pull grip to the cable end before feeding into conduit and confirm the sealing entry is seated properly at the conduit opening prior to pulling. Follow applicable NEC guidelines for cable pulling tension limits to avoid jacket or conductor damage.