Leviton Telcom L5362-E Duplex Receptacle 20A 5-20R

Product Description

The LEVITON TELCOM L5362-E is a duplex receptacle rated for 20-amp service on a 2-pole, 3-wire grounded circuit. It carries the NEMA 5-20R configuration, accepting both standard 5-15P and 5-20P plug types. This outlet is a hardwired device intended for installation in commercial, industrial, or residential electrical systems wherever 20-amp capacity is required at a duplex outlet location. The 5-20R configuration is common in commercial settings, kitchens, and utility areas where higher-draw equipment is connected. Licensed electricians and experienced electrical tradespeople are the primary installers of this device.

The L5362-E is suited for branch circuit applications requiring a grounded 20-amp duplex outlet. Typical installations include commercial office environments, light industrial panels, and any wiring scenario governed by NEC requirements for 20-amp receptacle circuits. Its 2-pole, 3-wire grounded design ensures proper equipment grounding continuity throughout the circuit. It ships as a single unit and is classified as a hardware accessory.

Key Features

• NEMA 5-20R configuration accepts both 5-15P and 5-20P plug types
• 2-pole, 3-wire grounded circuit design for proper equipment grounding
• 20-amp rated capacity suitable for commercial and industrial branch circuits
• Duplex outlet provides two receptacle positions from a single device
• Sold as individual unit for precise quantity ordering

Compatibility

Designed as an OEM-style replacement or new-installation duplex receptacle for standard single-gang electrical boxes wired on 20-amp, 120-volt grounded branch circuits using the NEMA 5-20R outlet configuration.

Installation Notes

Installation must be performed by a licensed electrician in accordance with the National Electrical Code (NEC) and applicable local codes. De-energize the branch circuit at the panel and verify absence of voltage with a meter before beginning work. The 5-20R receptacle requires a properly grounded 2-pole, 3-wire branch circuit; do not install on an ungrounded circuit. Verify box fill calculations and conductor sizing comply with NEC requirements before completing the installation.