Leviton Telcom 5480-I Tvss Receptacle 15A 125V 4-in-1

Product Description

The LEVITON TELCOM 5480-I is a transient voltage surge suppressor (TVSS) receptacle rated at 15 amps and 125 volts. It combines surge suppression with a standard outlet configuration in a single 4-in-1 unit, providing point-of-use protection against voltage transients that can damage connected equipment. Electricians and low-voltage technicians install this device in place of a standard duplex receptacle wherever sensitive electronics or communication equipment require surge protection at the outlet level.

The 5480-I is suited for residential and light commercial installations where surge protection is needed directly at the outlet rather than at the panel. Typical applications include home offices, server rooms, communication closets, and any location with sensitive electronic equipment. The 4-in-1 design integrates multiple protective functions into one unit, reducing the need for additional inline surge devices and keeping the installation clean and code-compliant.

Key Features

• Integrated TVSS protection at the receptacle level for point-of-use surge suppression
• Rated 15 amps at 125 volts for standard branch circuit compatibility
• 4-in-1 configuration combines multiple protective functions in a single device
• Replaces a standard duplex receptacle with no additional hardware required
• Suitable for residential and light commercial communication and electronics installations

Compatibility

Designed as an OEM-style replacement or upgrade for standard 15-amp, 125-volt duplex receptacle locations where transient voltage surge suppression is required at the point of use.

Installation Notes

Installation should be performed by a licensed electrician in accordance with NFPA 70 (NEC) requirements for surge-protective devices and receptacle wiring. Always de-energize the branch circuit at the panel and verify absence of voltage with a meter before beginning work. Confirm the wall box and wiring gauge are compatible with a 15-amp, 125-volt device before installation. Do not install on circuits exceeding the device voltage or amperage rating.